Engine mounts, engine supports
Number | Designation | Engine | Engine | ||
BA22.10-P-1003-01Q | Nut for engine bracket on engine mount | Nm | 48 | 48 | |
BA22.10-P-1004-01Q | Nut for engine bracket on timing case cover | Nm | 48 | 48 | |
BA22.10-P-1005-01Q | Bolt for engine bracket on timing case cover | Nm | 48 | 48 | |
454 589 04 09 00
Socket set
Motor crossmember
454 589 00 61 00
P01.10-2520-09
Shown on engine 135.9
1 Position engine bridge (1) on the attachment points (arrows) of the body.
Ensure correct seating of the engine bridge (1).
2 Tighten the adjusting screws and the adjusting nuts on the
motor crossmember (1).
3 Fasten the retaining bracket (2) on the bracket (3).
4 Pretension the chain (5) slightly by turning the wing nut (4).
P01.10-2521-07
Shown on engine 135.9
5 Remove screw (8) for engine bracket (6).
Replace bolt (8).
6 Unscrew nuts (9, 10) for engine bracket (6).
Replace nuts (9, 10).
7 Remove engine bracket (6).
8 Position retaining bracket (11) on studs (12) on timing case cover (7) and fasten in place with nut (13).
9 Lightly pretension the chain (16) of the engine bridge by turning the second wing nut slightly.
10 Remove bolt (14) and ground line (15).
11 Detach engine bridge in reverse order.