Crank engine with starter

AR01.10-P-0110MD

Crank engine with starter

30.4.03



Remove/Install

1

Detach key from the EIS control unit

Vehicles with Keyless-Go Code 889: press Start/Stop button repeatedly until ignition is switched off.

2

Remove air cleaner housing

AR09.10-P-1050M

3

Disconnect electrical connector at pressure regulator valve (Y74)

 Prevents the injection of fuel.

4

Connect compression tester (1)

 Only connect the electrical feed lines.

AR01.10-P-0010-01L

 Compression recorder

*001589762100

 Electrical connection set

*220589009900

Danger!

Risk of accident as vehicle may start off by itself with the engine running. Risk of injury as working around the engine during start-up or while running may result in contusions and burns

Secure vehicle to prevent it from moving.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

5

Crank engine

 Do not crank engine via the key in the EIS control unit, rather operate contact switch (2) of compression tester (1).

6

Install in the reverse order

7

Read out DTC memory

Diagnosis system STAR DIAGNOSIS

*WH58.30-Z-1048-13A



Connect STAR DIAGNOSIS and read out fault memory

AD00.00-P-2000-04A

Number

Designation

WH58.30-Z-1048-13A

STAR DIAGNOSIS diagnosis system, Compact Passenger Car

6511 1801 00