Removing and installing engine with removal fixture

Typ ar · téma 01.10 · verze 0108 · 2006-07-25

Platí pro: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0 ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 01 Motor kompletní, odvětrání motoru, hlava válců, kliková skříň › 01.10 Motor kompletní — Řada 901 (modely 0**, 6**) · Řada 902 (modely 0**, 6**) · Řada 903 (modely 0**, 6**) · Řada 904 (modely 0**, 6**)

EinPAS 15 Motor › 15.15 Kompletní spalovací motor/blok motoru/klikový mechanismus › 15.15.15 Spalovací motor kompletní — Řada 901 (modely 0**, 6**) · Řada 902 (modely 0**, 6**) · Řada 903 (modely 0**, 6**) · Řada 904 (modely 0**, 6**)

Platí také pro motory/převodovky: 111 979, 111 984

AR01.10-D-2400-01C

Removing and installing engine with removal fixture

 Engine mounts, engine supports

Number	Designation		Engine 111.979	Engine 111.984


BA22.10-N-1002-01H	Engine support to front engine mount	Nm	83	83

Workshop equipment

WE58.40-Z-1020-11A

Removal fixture for engine

Removing and installing engine with removal fixture

D01.10-1001-01

1  Move in engine removal fixture, attach stop parts to engine and raise engine slightly.

 Before raising engine, set center of gravity and tighten clamping bolt (arrow).

D22.10-1004-01

D22.10-1003-01

2 Slacken engine supports (1 and 5) at both engine mounts (4 and 8), raise engine further and pull out.

Installation: Place engine slightly onto the engine mounts (4 and 8), screw in the securing bolts (2 and 6) and tighten by hand until they make contact. Then, lower engine fully and tighten securing bolts (2 and 6) to the final torque.
Pay attention to tightening torque.