ar0110d240001b

Removing and installing engine with removal fixture

Typ ar · téma 01.10 · verze 0106 · 2006-07-25

Platí pro: ENGINE 602.984 in MODEL 667, 668, 670 ENGINE 602.985 in MODEL 668, 670

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 01 Motor kompletní, odvětrání motoru, hlava válců, kliková skříň › 01.10 Motor kompletní — Řada 602 (modely 984, 985) · Řada 667 · Řada 668 · Řada 670

EinPAS 15 Motor › 15.15 Kompletní spalovací motor/blok motoru/klikový mechanismus › 15.15.15 Spalovací motor kompletní — Řada 602 (modely 984, 985) · Řada 667 · Řada 668 · Řada 670

AR01.10-D-2400-01B

Removing and installing engine with removal fixture

Engine 602.984 in model 667, 668, 670

Engine 602.985 in model 668, 670

Engine mounts, engine supports

Number

Designation

Engine 602.980

Engine 602.984/
985

BA22.10-N-1002-01A

Engine support to front engine mount

Nm

83

68

Workshop equipment

WE58.40-Z-1022-11A

Engine supporting arm

Removing and installing engine with removal fixture

D01.10-0066-01

1 Move in engine removal fixture and attach stop parts to the suspension points at the engine.

2 Raise engine slightly.

Before raising, set center of gravity (3 detents on transmission side) and tighten clamping bolt fully.

Removing and installing engine with removal fixture

D01.10-0014-01

3 Unbolt engine support at engine mount.

4 Raise engine further and remove.

Installation
Move engine down slightly onto the engine mounts. Screw in securing bolts and tighten by hand until they make contact. Then, lower engine fully and tighten securing bolts to the specified torque.