AR01.00-S-2410C | Disconnecting, connecting engine wiring harness | 20.8.98 |
ENGINE 611.980 in MODEL 638.094 /194 /294
with CODE (MQ4) Engine OM611 DE22 LA (75 kW)
with CODE (MQ5) Engine OM611 DE22 LA (90 kW)
ENGINE 611.980 in MODEL 638.094 /194 with CODE (MQ3) Engine OM611 DE22 A (60 kW)
S01.00-2508-09
1 Voltage supply cable
2 Voltage supply cable
3 Socket box
4 Connector
B35 Charge air pressure sensor
B39 Hot film mass air flow sensor
G2 Battery
S19 Reversing light switch
5 Connector
6 Connector
7 Air cleaner housing
A30 Automatic transmission connector
S01.00-2510-09
8 Intercooler
10 Receiver/drier
A15 Glow output stage
A15.1 Glow output stage communication connector
B63 Intake air temperature sensor
M 34.1 Engine radiator fan connector 1
M34.2 Engine radiator fan connector 2
A15.2 Glow output stage glow plugs connector
A15.3 Glow output stage circuit 30 connector
B61 Air conditioning refrigerant pressure sensor
S01.00-2513-06
9 Ground cable
A53 CDI control module
A53.4 CDI control module connector 4
A53.5 CDI control module connector 5
| Removing, installing | ||
1 | Disconnect ground cable at battery (G2) | Installation: encode radio and set correct time | |
2 | Unplug connector at hot film mass air flow sensor (B39) | ||
3 | Remove air cleaner housing (7) | ||
4.1 | Unplug connector (A30) at automatic transmission | With code G40 (automatic transmission) | |
5.1 | Unplug connectorr (S19.1) at reversing light switch (S19) | With manual transmission | |
6 | Disconnect voltage supply cables (1, 2) at socket box (3) | ||
7 | Take off cover at socket box (3) and unplug connections (4, 5, 6) | ||
8 | Unplug connectors (A15.1), (A15.2) and (A15.3) at glow output stage (A15) | ||
9 | Unplug connectors (M34.1) and (M34.2) at engine radiator | ||
10.1 | Unplug flat connector of refrigerant pressure sensor (B61) | With code H06 (air conditioning) | |
11.1 | Unplug connector of intake air temperature sensor (B63) | With code MQ4 and MQ5 | |
12 | Detach air vent on right side | ||
13 | Unplug connectors (A53.5) and (A53.4) from engine control module (A53) | Disconnect engine wiring harness at control module (A53) and carefully pull through the firewall into the engine compartment | |
14 | Unbolt ground cable (9) from the body | ||
15 | Install in the reverse order |