ar0100p241002gqa

Disconnect engine wiring harness

Typ ar · téma 01.00 · verze 0100 · 2012-05-04

Platí pro: ENGINE 651 in MODEL 166.0

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 01 Motor kompletní, odvětrání motoru, hlava válců, kliková skříň › 01.00 Všeobecné — Řada 166 (modely 0**) · Řada 651

EinPAS 25 Palubní síť/síť/multifunkční systém › 25.25 Hlavní kabelový svazek › 25.25.20 Kabelový svazek motoru — Řada 166 (modely 0**) · Řada 651

AR01.00-P-2410-02GQA

Disconnect engine wiring harness

Battery

Number

Designation

Model
166

BA54.10-P-1002-01C

Nut, circuit 30 in prefuse box

Nm

15

Disconnect engine wiring harness

P54.10-3637-02

1 Remove cover (20) under front passenger seat.

2 Detach ground line (21) from on-board electrical system battery (G1) and place to one side.

Insulate connecting point for ground line (21). This avoids unintended contact of the detached ground line (21) with the negative terminal of the on-board electrical system battery (G1).

Disconnect engine wiring harness

P01.00-3368-06

Only perform Operation steps 3 to 7 for removal of the engine.

3 Detach electrical connections (8) on ECU on the vehicle side and place to one side.

4 Detach alternator/starter wiring harness (9) and electric steering wiring harness (11) on prefuse box

5 Disconnect electrical connector (10).

Disconnect engine wiring harness

P01.00-3369-04

6 Disconnect electrical connections (12, 13) on electric power steering and detach.

The electrical connections (12, 13) are located on the front axle behind the stabilizer bar.

Disconnect engine wiring harness

P22.10-2394-07

7 Disconnect electrical connections (5) for switchable engine mount.