P00.60-2011-11
Lifting up at the front
In order to avoid damage to the steering, under no circumstances should the vehicle be raised at the rear cross traverse
1 Position inspection pit lift or workshop jack at the jacking up sockets (1m) of the front cross traverse of the front axle carrier (1).
2 Raise vehicle.
Vehicles with 4MATIC
If the front engine compartment cover is mounted,
a flat cap for the assembly lift/vehicle jack must be used, or
a suitable base must be placed on the bent cap,
otherwise the front engine compartment cover will be damaged.
P00.10-0017-01
Raising vehicle at rear
1 Position inspection pit lift or workshop jack at the rear axle center assembly.
2 Raise vehicle.