Secure vehicle on vehicle lift

AR00.60-P-0100T

Secure vehicle on vehicle lift

8.12.10

Attach, remove

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

 The  vehicle lift safety devices (01) must always be mounted in pairs i.e. at two positions in the vehicle longitudinal members.

The  vehicle lift safety devices (01) can both be mounted at the front, at the rear or on one side.

 Vehicle lift safety device

*171589013100

1

Remove plastic screws (2) of vehicle lift supports (1)

2

Pry vehicle lift supports (1) out of longitudinal members

 Do not use any sharp-edge tools, as this will result in damage to the longitudinal member.

3

Insert vehicle lift safety devices (01) into longitudinal members

 Vehicle lift safety device

*171589013100

4

Swivel lever (01a) of vehicle lift safety devices (01) to the right

 The  vehicle lift safety devices (01) are thereby locked onto the longitudinal members.

5

Adjust support plates (4) of vehicle lift support arms (3) to the height of the vehicle lift safety devices (01) or the height of the remaining vehicle lift supports (1)

 Rotate support plates (4) until they make contact with the  lifting platform safety devices (01) or the lifting platform supports (1) of the longitudinal members.

6

Raise vehicle with vehicle lift

7

Secure vehicle lift safety devices (01) to vehicle lift support arms using tensioning straps

8

Dismantle in the reverse order