Remove contacts from 2.5 solder contact coupling round plug contact

Typ ar · téma 00.19 · verze 0109 · 2009-06-23

Platí pro: MODEL all

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 0 Celkový › 00 Celkové vozidlo › 00.19 Elektrická soustava vozidla, celkové propojení — Řada 900 (modely 9**) · Řada 902 (modely 9**) · Řada 904 (modely 918, 919, 924, 925, 938, 943, 957) · Řada 906 (modely 917, 918, 924, 953)

EinPAS 25 Palubní síť/síť/multifunkční systém › 25.25 Hlavní kabelový svazek › 25.25.1 Základní informace — Řada 900 (modely 9**) · Řada 902 (modely 9**) · Řada 904 (modely 918, 919, 924, 925, 938, 943, 957) · Řada 906 (modely 917, 918, 924, 953)

Platí také pro motory/převodovky: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

AR00.19-P-0120-17A

Remove contacts from 2.5 solder contact coupling round plug contact

000 589 13 99 00

Blade holder with clamping pliers

Wiring harness repair kit, basic

New passenger vehicle wiring harness repair kit

RK 2.5 blade solder contact

220 589 04 99 00

220 589 01 99 50

220 589 01 99 53

P54.18-2539-01

Unfasten secondary release on version with slide

1 Insert a suitable tool under the slide valve cap (1).

2 Using a suitable tool, press the slide valve out of the last detent in direction shown by arrow.

P54.18-2540-04

Unfasten secondary release on version with securing clip

3 Using a suitable tool, pry up the side tabs of the retaining clamp (1).

4 Fold up securing clip (1) in direction of arrow.

P54.18-2541-06

Unpin contact from coupling

5 Insert blade holder with  clamping pliers and  RK 2.5 solder contact blade from rear side into cable duct of coupling.

 Align sleeve of  RK 2.5 solder contact blade to spring shackle (1) of coupling. This step presses the spring shackle (1) in the coupling into position.

6 Remove female contact together with blade holder with  clamping pliers and  RK 2.5 solder contact blade from coupling by gently pulling towards rear.