000 589 13 99 00
Blade holder with clamping pliers
Wiring harness repair kit, basic
New passenger vehicle wiring harness repair kit
LSK 8 blade
220 589 04 99 00
220 589 01 99 50
220 589 01 99 56
P54.18-2568-10
Unfasten secondary release on version with disk
1 Using a suitable tool, push the disk out of the last detent in direction shown by arrow.
P54.18-2569-06
Unpin female contacts from connector
2 Insert blade holder with clamping pliers and LSK 8 blade from front side though openings at contact cavity of connector (1).
This results in the spring shackles (2) of the contact pin being compressed.
3 A slight tug on the corresponding cable will remove the contact pin from the connector.