ar0019p012008a

Remove contacts from Junior Power Timer connector

Typ ar · téma 00.19 · verze 0107 · 2009-06-23

Platí pro: MODEL all

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 0 Celkový › 00 Celkové vozidlo › 00.19 Elektrická soustava vozidla, celkové propojení — Řada 900 (modely 9**) · Řada 902 (modely 9**) · Řada 904 (modely 918, 919, 924, 925, 938, 943, 957) · Řada 906 (modely 917, 918, 924, 953)

EinPAS 25 Palubní síť/síť/multifunkční systém › 25.25 Hlavní kabelový svazek › 25.25.1 Základní informace — Řada 900 (modely 9**) · Řada 902 (modely 9**) · Řada 904 (modely 918, 919, 924, 925, 938, 943, 957) · Řada 906 (modely 917, 918, 924, 953)

Platí také pro motory/převodovky: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

AR00.19-P-0120-08A

Remove contacts from Junior Power Timer connector

Remove contacts from Junior Power Timer connector
Remove contacts from Junior Power Timer connector
Remove contacts from Junior Power Timer connector
Remove contacts from Junior Power Timer connector

000 589 13 99 00

Blade holder with clamping pliers

Wiring harness repair kit, basic

New passenger vehicle wiring harness repair kit

JPT / SPT blade

220 589 04 99 00

220 589 01 99 50

220 589 01 99 61

Remove contacts from Junior Power Timer connector

MCP 2.8 / Fl blade. 2.8 / JPT / SPT

000 589 13 99 30

Remove contacts from Junior Power Timer connector

P54.18-2474-01

Unfasten secondary release on version with locking bar

1 Using a suitable tool, move locking bar (1) in direction of arrow out of locked position.

Remove contacts from Junior Power Timer connector

P00.19-3527-01

Unfasten secondary release on version with retaining cap (shown on Junior Power Timer, micro quadlock system (MQS) connector)

2 Using a suitable tool, pry up the lock tab on the retaining cap (6).

3 Move retaining cap (6) in direction of arrow up to the stop.

Remove contacts from Junior Power Timer connector

P00.19-2962-01

Unfasten secondary release on version with lock tab

4 Insert suitable tool underneath locking tabs (1).

5 Pry up the lock tabs (1) in direction shown by arrow.

Remove contacts from Junior Power Timer connector

P00.19-3030-06

Unpin contact pins from the connector

6 Insert blade holder with clamping pliers with JPT/SPT blade or MCP 2.8/Fl blade. 2.8/JPT/SPT blade from the front through the openings in contact cavity of connector housing (3).

This results in the spring shackles of the contact pin (2) being compressed.

7 Remove contact pin (2) from connector housing (3) by gently pulling the relevant cable.