000 589 13 99 00
Blade holder with clamping pliers
Wiring harness repair kit, basic
New passenger vehicle wiring harness repair kit
SLK 2.8 blade
220 589 04 99 00
220 589 01 99 50
220 589 01 99 62
P54.18-2573-10
Unpin secondary release on version with contact retainer
1 Using a suitable tool, push tabs of contact retainer (1) in direction of arrow out of locked position.
P00.19-3530-06
Unpin contact pins from the connector
2 Insert blade holder with clamping pliers and SLK 2.8 blade from front side though openings at contact cavity of connector (1).
Insert tool carefully to prevent damaging webs at openings of contact cavity.
This presses together the springs of the contact pin (2).
3 A slight tug on the corresponding cable will remove the contact pin from the connector.
Rocking the contact pin back and forth, thus making use of the full housing tolerance, may help to unpin the contact.