ap8330t8334ba

Air conditioning - cleaning the air filter for passenger compartment ventilation

Typ ap · téma 83.30 · verze 0100 · 2005-07-12

Platí pro: MODEL 613.355 /358 /388 /455 /485 with CODE (HA4) Konvekta air conditioning with roof heater and timer MODELS 613.355 /358 /388 /455 /485 with CODE (HA4) Konvekta air conditioning with roof heater and timer with CODE (H92) Deletion of roof heater

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 83 Klimatizace › 83.30 Klimatizace — Řada 613 (modely 355, 358, 388, 455, 485)

EinPAS 39 Topení/větrání/chlazení › 39.15 Klimatizace › 39.15.32 Skříň/výměník tepla/výparník/filtr — Řada 613 (modely 355, 358, 388, 455, 485)

AP83.30-T-8334BA

Air conditioning - cleaning the air filter for passenger compartment ventilation

2.7.02

MODEL 613.355 /358 /388 /455 /485 with CODE (HA4) Konvekta air conditioning with roof heater and timer

MODELS 613.355 /358 /388 /455 /485
with CODE (HA4) Konvekta air conditioning with roof heater and timer
with CODE (H92) Deletion of roof heater

Air conditioning - cleaning the air filter for passenger compartment ventilation

T83.30-0051-08

shown on models 613.358, 613.388

1 Covers

2 Housing box

5 Wire

3 Recirculated air flaps

4 Fine filter

Remove

1

Switch ventilation in passenger compartment to recirculated air mode

See air conditioning operating instructions.

Danger!

Risk of injury. Mechanism can pinch, crush or, in extreme cases even sever extremities.

No parts of the body or limbs should be within the operating range of the mechanism when moving components.

AS00.00-Z-0009-01A

2

Switch off ignition

While working in the openings of the recirculated air flaps (3) do not operate the operating module of the air conditioning.

3

Use suitable means in the working area to protect the passenger seats from contamination

4

Remove the covers (1) of the recirculated air flaps (3)

Danger!

Risk of injury from cuts and grazes on sharp-edged vehicle components

When working on or in area of sharp vehicle parts with burrs always wear protective gloves.

Deburr repair panels.

AS00.00-Z-0017-01A

5

Detach fine filter (4) from evaporator

The fine filter (4) is connected to the evaporator by wires (5).

6

Remove fine filter (4)

7

Clean any contamination in the housing box (2)

8

Clean fine filter (4) outside the vehicle

Wash out the fine filter (4) with water and dry carefully with compressed air.

Install

9

Attach fine filter (4) to the evaporator

Do not damage the evaporator cooling pipes when reinstalling the fine filter (4).

Thin tie straps can also be used instead of wires (5).

10

Reinstall covers (1) of recirculated air flaps (3)

Odkazované dokumenty