Clean ventilation filter, inspect and replace if necessary · ap8310g8337na · Mercedes-Benz WIS

AP83.10-G-8337NA

Clean ventilation filter, inspect and replace if necessary

9.3.06

MODEL 405.210 /230
USA/Canada only

Clean ventilation filter, inspect and replace if necessary

G83.10-3141-01

1 Housing cover

2 Retaining clip

3 Air recirculation flap

G83.10-3142-01

G83.10-3143-01

4 Retaining grille

5 Ventilation filter mat

6 Bolt

G83.10-3144-01

G83.10-3145-01

Shown: Vehicle with fine dust pollen filter (code F46)

7 Cover

8 Pollen filter

G83.10-3146-01

1	Open engine hood and raise to vertical position
	Opening engine hood, moving to upright position and closing		AR88.40-G-1000NA
2	Pull housing cover (1) out of retaining clips (2) and lift off (arrow)
3	Detach air recirculation flap (3) with connecting linkage (arrows)
4	Remove retaining grille (4) with ventilation filter mat (5) (arrows)
5	Undo screws (6) on inside of retaining grille (4) and remove ventilation filter mat (5) from retaining grille (4)
6	Check retaining grille (4) for damage; fit new grille if necessary
7	Clean ventilation filter mat (5); fit new mat if necessary	 Change daily in extremely dusty environments. Change at least every two years.
		 Clean ventilation filter mat (5) with vacuum cleaner. Ventilation filter mat (5) must be changed if it is damaged.
8	Install ventilation filter mat (5) in retaining grille (4)
9	Clean housing, seals and sealing surfaces using a damp cloth
10	Install retaining grille (4) with ventilation filter mat (5)
11	Attach air recirculation flap (3) with connecting linkage
12	Insert housing cover (1) into retaining clips (2)
13	Remove cover (7)	Only on vehicles with fine dust pollen filter (code F46)
		 Actuate both side lugs.
14	Remove pollen filter (8)	Only on vehicles with fine dust pollen filter (code F46)
15	Clean pollen filter (8); fit new filter if necessary	Only on vehicles with fine dust pollen filter (code F46)
		 Change daily in extremely dusty environments. Change at least every two years.
		 Clean pollen filter (8) with vacuum cleaner. Fit new filter in the case of severe fouling.
16	Install pollen filter (8)	Only on vehicles with fine dust pollen filter (code F46)
17	Install cap (7)	Only on vehicles with fine dust pollen filter (code F46)
		 Both side lugs must latch in position.
18	Close engine hood
	Opening engine hood, moving to upright position and closing		AR88.40-G-1000NA

Odkazované dokumenty

ar8840g1000na