ap8300t8381aa

Replace dust filter for heating/air conditioning

Typ ap · téma 83.00 · verze 0100 · 2005-07-12

Platí pro: MODELS NMB671.015 /020 /021 /030 /042 with CODE (HKA) Konvekta ACX 602 air conditioning with roof heater

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 83 Klimatizace › 83.00 Všeobecné — Řada 671 (modely 015, 020, 021, 030, 042)

EinPAS 39 Topení/větrání/chlazení › 39.15 Klimatizace › 39.15.32 Skříň/výměník tepla/výparník/filtr — Řada 671 (modely 015, 020, 021, 030, 042)

AP83.00-T-8381AA

Replace dust filter for heating/air conditioning

4.12.02

MODELS NMB671.015 /020 /021 /030 /042 with CODE (HKA) Konvekta ACX 602 air conditioning with roof heater

Replace dust filter for heating/air conditioning

T83.00-0048-05

1 Heat exchanger

2 Water filter

3 Heating pipes

4 Frames

Arrows wires

Remove

Danger!

Risk of injury from grazing or cutting body parts on sharp vehicle parts

Always wear protective gloves when working on or near sharp and untrimmed vehicle parts.

Deburr metal repairs.

AS00.00-Z-0017-01A

1

Remove evaporator unit paneling

For operations in the roof area, the accident prevention regulations must be observed

Remove/install evaporator unit paneling

AR83.50-T-5010AA

2

Remove water filter (2) from the heat exchanger (1)

In the upper area the water filter (2) is connected to the heat exchanger (1) by wires (arrows). In the lower area the water filter (2) is only inserted between the heat exchanger (1) and the frame (4).

3

Remove water filter (2)

Wash out water filter (2) with water and clean using compressed air, replace if necessary.

Install

4

Attach water filter (2) to the heat exchanger (1)

When reinstalling the

water filter (2), do not damage the heating pipes (3).

Instead of wires (arrows) thin tie straps can also be used.

5

Install evaporator unit paneling

Remove/install evaporator unit paneling

AR83.50-T-5010AA

Odkazované dokumenty