AP83.00-P-8382DA | Replacing activated charcoal filter | 1.12.93 |
MODEL 140 with CODE (306a) Activating charcoal filter (odor filter)
P83.00-0210-01
P82.00-0003-01
3 Phillips screws
P83.00-0209-01
P83.00-0211-01
1 Evacuation and charging connection
| Removal, installation | ||
1 | Remove windshield wiper | ||
2 | Remove dust filter | | |
3 | Remove windshield wiper bearing | | |
4 | Remove water collector | For this purpose screw out four screws | |
5 | Screw out Phillips screws (3) | Remove cover | |
6 | Remove cover on heater housing | For this purpose screw out five screws | |
7 | Evacuate activated charcoal filter pneumatic seal | To pull out and install the activated charcoal filter the pneumatic seal must remain evacuated. Leave tester connected. | |
8 | Pull activated charcoal filter upwards and out | | |
9 | Reinstall in opposite order |
140 589 02 33 00
140 589 00 98 00
140 589 00 07 00
201 589 13 21 00
Puller hooks
Tester
Two-hole nut driver
Circulation cover