ap8235t8210a

Windshield washer system - inspect fluid level, adjust to correct level

Typ ap · téma 82.35 · verze 0102 · 2006-01-18

Platí pro: MODEL NMB613.355 /358 /388 /455 /485, 671

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 82 Elektrické zařízení, nástavba › 82.35 Ostřikovače oken — Řada 613 (modely 355, 358, 388, 455, 485) · Řada 671

EinPAS 36 Výhled › 36.30 Stíraní/ostřikování › 36.30.1 Základní informace — Řada 613 (modely 355, 358, 388, 455, 485) · Řada 671

AP82.35-T-8210A

Windshield washer system - inspect fluid level, adjust to correct level

10.1.06

MODEL NMB613.355 /358 /388 /455 /485, 671

Windshield washer system - inspect fluid level, adjust to correct level

T82.35-0002-11

Illustrated on model 613.355

Checking

1

Open front flap

Only on model 613.355/358/388/455/ 485

2

Remove cover of filler neck for windshield washer system reservoir

3

Check fluid level in reservoir of windshield washer system and adjust to correct level if necessary

Depending on the version, the correct fluid level is reached on model 671 when the windshield washer fluid reaches the filler neck or flows out of the overflow hose.

Observe mixing ratio according to table on the packaging of the windshield washer fluid concentrate.

Windshield washer fluid concentrate

Sheet 371.0

BB00.40-P-0371-00A

4

Install cover of filler neck for windshield washer system reservoir

5

Close front flap

Only on model 613.355/358/388/455/ 485

Odkazované dokumenty