Check and correct headlamp adjustment

AP82.10-P-8260FF

Check and correct headlamp adjustment

7.10.03



Check

1

Drive vehicle onto level surface.

 The vehicle must be in the ready-to-drive condition (curb weight, fuel tank full or corresponding additional weight). Front wheels in the straightahead position.

2

Correct tire inflation pressure

3

Place 75 kg or one person on driver seat and set headlamp height adjustment to "0"

4

Align headlamp beam adjuster to the vehicle and carry out height setting in relation to center of headlamp.

 Observe operating instructions for headlamp adjuster tester.

 Headlamp beam adjuster

*WE58.40-Z-1006-19A

5

Check adjustment of left low beam (E1e2) and right low beam (E2e2) and correct if necessary

 If necessary adjust the left low beam (E1e2) or right low beam (E2e2) at the adjusting screws (1, 3).
Should the light beam of the headlamps not display the correct light-dark boundary on the headlamp beam setter, the headlamps might be adjusted for right-/ left-hand traffic.
See 

AP82.10-P-8260-05FF



Adjust headlamps

AR82.10-P-4735FF

6

Check adjustment of left high beam (E1e1) and right high beam (E2e1) and correct if necessary

 Adjust left high beam (E1e1) and right high beam (E2e1) at the adjusting screw (2).

AP82.10-P-8260-02FF

7.1

Check the setting of the left front fog lamp (E5/1) and the right front fog lamp (E5/2) and correct if necessary

Only on vehicles with code (V07) fog lamp (FFO).

AP82.10-P-8260-04FF

WE58.40-Z-1006-19A

Headlamp adjustment testing unit