ap5530g5504na

Work hydraulics - Change oil and filter

Typ ap · téma 55.30 · verze 0106 · 2011-09-16

Platí pro: MODEL 405.210 /230 with CODE (H02) Single-circuit hydraulic system (black/white) with CODE (H06) Dual-circuit hydraulic system with CODE (H08) Dual-circuit hydraulic system (proportional) only for USA/Canada

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 55 Přídavné pohony, hydraulické a kloubové systémy › 55.30 Hydraulický pohon, hydraulická čerpadla — Řada 405 (modely 210, 230)

EinPAS 35 Karoserie/rám/montované díly › 35.70 Zvedací závěs/hydraulické zařízení › 35.70.1 Základní informace — Řada 405 (modely 210, 230)

AP55.30-G-5504NA

Work hydraulics - Change oil and filter

13.9.11

MODEL 405.210 /230
with CODE (H02) Single-circuit hydraulic system (black/white)
with CODE (H06) Dual-circuit hydraulic system
with CODE (H08) Dual-circuit hydraulic system (proportional)
only for USA/Canada

Work hydraulics - Change oil and filter
Work hydraulics - Change oil and filter

G55.30-3283-01

1 Oil filter cover

2 Drain screw

3 Cap

4 Inspection glass

G55.30-3284-01

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

Danger!

Risk of injury to skin or eyes caused by hydraulic fluid spraying out under high pressure. Risk of poisoning caused by swallowing hydraulic fluid

Depressurize hydraulic system completely before starting any work on system. Wear protective clothing and safety glasses.

AS00.00-Z-0013-01A

1

Start engine

2

Retract all hydraulic cylinders that are work-hydraulic operated

No hydraulic cylinders may be extended, as otherwise the oil reservoir may be overfilled.

3

Turn off engine

4

Remove oil filter cover (1)

5

Replace oil filter element

Dispose of used oil filter elements in an environmentally compatible manner.

6

Screw in oil filter cover (1)

7

Remove drain screw (2) and drain oil

Collect oil in a suitable container and allow to drain completely.
Dispose of used oil properly and in a manner acceptable to the environment.

8

Screw in drain screw (2)

9

Open cap (3) and fill engine oil through filler opening

The oil level must be located in the visible area of the inspection glass (4).

Do not fill beyond the visible area of the inspection glass (4).

*BF55.30-N-1003-02A

10

Close cap (3)

11

Check hydraulic system for leaks.

Visual inspection.

Hydraulic drive, hydraulic pump

Number

Designation

Model
405.210/230
with code H02 or H06 or H08

BF55.30-N-1003-02A

Engine oil
SAE 10 W

Filling capacity of work hydraulics (for initial filling)

Liters

45.0

Filling capacity of work hydraulics (for oil change)

Liters

41.0

Specifications for Operating Fluids

Sheet

-

Odkazované dokumenty