AP46.00-P-4653RR | Check track rod and drag link linkage for play, check rubber boots | 10.6.03 |
Models 452.3 /4
P46.00-2059-04
1 Bellows
2 Rubber boots
3 Flange joint
| Remove | ||
1 | Remove underbody paneling | ||
| Remove/install underbody paneling | ||
| Inspect | ||
2 | Stretch the bellows (1) by turning the steering onto left and right lock whilst checking for damage (cracks, chafing marks, indentations) | Never check the bellows by pressing in or around the beads, as this leaves behind damage on the plastic and leads to leaks in the long term. If necessary: -subject to separate repair order | |
Replace boot | |||
| Remove and install CV boot | ||
3 | Check tie rod joints for play | Left and right side Check tie rod joints by pulling and pushing forcefully. If necessary: -subject to separate repair order | |
Replace flange joint (3) | |||
| Remove/install flange joint | ||
4 | Check boot (2) on flange joint (3) for leaks and condition | Left and right side If boot (2) is leaking: -subject to separate repair order | |
Replace flange joint (3) | |||
| Remove/install flange joint | ||
| Install | ||
5 | Install underbody paneling | ||
| Remove/install underbody paneling |