ap4600i4650b

Checking condition of steering mechanism

Typ ap · téma 46.00 · verze 0104 · 2011-05-05

Platí pro: STEERING 766.532 /533 in MODEL 684.482

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 46 Řízení › 46.00 Všeobecné — Řada 684 (modely 482)

EinPAS 22 Řízení › 22.15 Servořízení › 22.15.5 Servořízení kompletní — Řada 684 (modely 482)

Platí také pro motory/převodovky: 766 532, 766 533

AP46.00-I-4650B

Checking condition of steering mechanism

5.5.11

STEERING 766.532 /533 in MODEL 684.482

Checking condition of steering mechanism
Checking condition of steering mechanism
Checking condition of steering mechanism

N46.10-2018-01

N46.40-2021-01

N46.10-2016-01

Check

Steering play

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near engine

Secure vehicle to prevent it from moving.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

1

Start engine and move front wheels to straight-ahead position.

2

Check play (a) at steering wheel. To do so, turn steering wheel alternately to left and right until front wheels move.

If permitted steering play

at steering wheel is exceeded

Check steering gear and all steering transmission components in relation to steering gear for undesirable play - as a separate repair order.

*BE46.00-N-1001-01B

Steering linkage

3

Check rubber boots (2) on tie-rod and drag-link ends.

Carefully check to make sure that the entire surface of each rubber boot and the folds resulting from the installation position are undamaged.

Check that the rubber boots are securely fitted to the seating surface of the associated arm.

Do not replace damaged or leaking rubber boots!

Replace appropriate ball head or entire track or tie rod if necessary.

- subject to separate repair order.

4

Push back rubber boots (2) and check ball head bolt for corrosion.

*385589036300

*385589046300

Lubricate ball head bolt without corrosion effects

Long-life grease (NLGI grade 2)

Sheet 266.2

BB00.40-P-0266-02A

Replace ball head bolt with corrosion effects - as a separate repair order.

5

Check each individual tie-rod and drag-link end (1) for play. To do so, push and pull tie rod and drag link firmly by hand in axial direction relative to ball pin

If the permitted amount of axial play is exceeded
replace relevant tie rod or drag link - against separate order

*BE46.00-N-1002-01B

6

Check tie rods and drag links (3), steering knuckle arms and steering arms and steering gear pitman arms for damage and correct mounting.

If any damage or defects are found,

Rectify damage / defects - as a separate repair order.

Test values for steering

Number

Designation

Steering 766.532/533 in model 684

BE46.00-N-1001-01B

Permissible play at steering wheel when at center position

mm

30

BE46.00-N-1002-01B

Permissible end play of ball joints

mm

2

Checking condition of steering mechanism
Checking condition of steering mechanism

385 589 04 63 00

Test panel

Test panel

385 589 03 63 00

Odkazované dokumenty