ap4600g4650na

Checking condition of steering mechanism

Typ ap · téma 46.00 · verze 0103 · 2008-01-18

Platí pro: MODEL 405.210 /230 USA/Canada only

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 46 Řízení › 46.00 Všeobecné — Řada 405 (modely 210, 230)

EinPAS 22 Řízení › 22.15 Servořízení › 22.15.5 Servořízení kompletní — Řada 405 (modely 210, 230)

AP46.00-G-4650NA

Checking condition of steering mechanism

14.1.08

MODEL 405.210 /230
USA/Canada only

Checking condition of steering mechanism
Checking condition of steering mechanism
Checking condition of steering mechanism

G46.10-3131-01

G46.40-3119-01

G46.40-3120-01

A Permissible play (at steering wheel when at center position)

2 Rubber boot

3 Drag link

4 Tie rod

5 Steering knuckle arm

1 Steering gear pitman arm

2 Rubber boot

3 Drag link

Checking

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

1

Start engine and move front wheels to straight-ahead position.

2

Check permissible play (A) at steering wheel

Turn steering wheel alternately to left and right until front wheels move.
If the permissible steering play
at the steering wheel is exceeded:

*BE46.00-N-1001-01E

Check steering gear and all steering transmission components for incorrect play subject to separate repair order.

3

Turn off engine

4

Check rubber boots (2) of drag link ends and tie rod ends

Check that the rubber boots (2) are firmly seated on the contact surface of the relevant control arm. Do not replace damaged or leaking rubber boots (2):

Replace appropriate ball head or, if necessary, change complete drag link (3) or tie rod (4), subject to separate repair order.

5

Check the drag link and tie rod end clearance individually by pulling and pushing firmly by hand in the axial direction of the ball pin

If the permissible axial play is exceeded:

*BE46.00-N-1002-01E

Replace relevant drag link or tie rod ends subject to separate repair order.

6

Check steering gear pitman arm (1), drag link (3), tie rod (4) and steering knuckle arm (5) for damage and correct attachment

If damage or defects are found:

Rectify damage and defects subject to separate repair order.

Steering test values

Number

Designation

Model
405.210/230
,

BE46.00-N-1001-01E

Permissible steering wheel play in center position

mm

30

BE46.00-N-1002-01E

Permissible axial play of ball joints

mm

2

Odkazované dokumenty