T42.10-0019-11
Illustrated on model 613.365
1 Granulate cartridge
| Removing | ||
1.1 | Depressurize the compressed-air drier by filling the compressed-air system | Charge the compressed-air system until the regulator cycles. | |
1.2 | Depressurize the compressed-air drier by releasing the compressed air | Disconnect the line at connection "1" on the compressed-air drier, release the compressed air, then reconnect the line. | |
2 | Unscrew granulate cartridge (1) | | |
Alternatively a strap wrench may be used. Removed granulate cartridges fall into the category of special waste due to the oil residues they contain, and must be treated the same as oil filters. | |||
| Installing | ||
3 | Lightly grease the threaded stem and seal ring on the new granulate cartridge | ||
4 | Screw on the granulate cartridge (1) by hand until the sealing ring touches the housing, and then tighten another half turn | ||
| Check | ||
5 | Apply compressed air to air dryer and check for leaks | The pressure regulator must come on for air to be applied to the air dryer. | |
6 | Enter replacement of the granulate cartridge in the maintenance booklet |
655 589 00 61 00
Cartridge key
Commercially available tools
Repair materials
Number | Designation | Order number |
BR00.45-Z-1014-06A | ATE grease | - |