ap4260m4381d

Compressed air drier - replacing granulate cartridges

Typ ap · téma 42.60 · verze 0100 · 2006-10-31

Platí pro: MODEL 905.613 Sprinter Classic 2+2 - 6.34 t minibus

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 42 Brzdy - hydraulická část a mechanická část › 42.60 Vzduchotlaková část — Řada 905 (modely 613)

EinPAS 21 Brzdy/podtlakový systém/vzduchotlaké zařízení › 21.35 Vzduchotlaké zařízení › 21.35.30 Vysoušení/regulace/čistění — Řada 905 (modely 613)

AP42.60-M-4381D

Compressed air drier - replacing granulate cartridges

31.5.05

MODEL 905.613
Sprinter Classic 2+2 - 6.34 t minibus

Compressed air drier - replacing granulate cartridges

M42.60-0023-08

Air compressor system for parking brake

1 Granulate cartridge

Remove

1

Bleed compressed air drier by filling compressed-air system or by releasing compressed air

By filling compressed-air system:

Fill compressed-air system until pressure governor cuts out.

By releasing compressed air:

Loosen line at connection "1" of compressed air drier, release compressed air and tighten line again.

2

Remove granulate cartridge (1)

Removed granulate cartridges fall into the category of special waste due to the oil residues they contain, and must be treated the same as oil filters.

*WH58.30-Z-1075-06A

Install

3

Apply a thin coating of grease to seal (arrow) of new granulate cartridge and threaded pin

*BR00.45-Z-1014-06A

4

Screw on granulate cartridge (1) by hand until the seal touches the housing then tighten another half turn.

5

Pressurize compressed-air drier and check for leaks.

Checking is only possible up to the air governor cut-off point.

Commercially available tools

Number

Designation

WH58.30-Z-1075-06A

Offset screwdriver

Repair materials

Number

Designation

Order number

BR00.45-Z-1014-06A

ATE grease

-