ap4110t4150b

Driveshaft joints and spline joints - Checking for play and wear

Typ ap · téma 41.10 · verze 0101 · 2005-07-12

Platí pro: MODEL 613.355 /364 /365 /455 /485

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 41 Kloubový hřídel › 41.10 Kloubový hřídel — Řada 613 (modely 355, 364, 365, 455, 485)

EinPAS 17 Hnací ústrojí/náprava › 17.40 Kloubový hřídel › 17.40.30 Kloubový hřídel pohon/pohon všech kol — Řada 613 (modely 355, 364, 365, 455, 485)

AP41.10-T-4150B

Driveshaft joints and spline joints - Checking for play and wear

28.7.00

MODEL 613.355 /364 /365 /455 /485

Driveshaft joints and spline joints - Checking for play and wear

N41.10-0266-01

	Inspecting
1	Move universal joints backwards and forwards in both directions of cross-piece and in direction of rotation of propeller shaft	 - The universal joint bearings must not be worn. - Slight play is permissible. Otherwise: Recondition universal joints if necessary, or replace propeller shaft - Subject to separate repair order.
2	Push propeller shaft upwards several times at collapsible section and move backwards and forwards in direction of rotation	 - The collapsible section must not be worn. - Slight play is permissible. Otherwise: Recondition collapsible section if necessary, or replace propeller shaft - Subject to separate repair order.
3	Check to ensure that seals on universal joint bearing and collapsible section are not damaged	 Recondition or replace propeller shaft and damaged seals. - Subject to separate repair order.