1 | Sealant |
2 | Inner roller bearing |
3 | Inner bearing outside race |
4 | Wheel hub |
5 | Outer bearing outside race |
6 | Outer roller bearing |
7 | Stop washer |
B35.20-0014-11
| Remove | ||
1 | Apply the parking brake and release lightly the wheel clamping nuts | ||
2 | Lift vehicle and support it on racks located under the rear axle beam | ||
3 | Remove the rear wheels | ||
| |||
4 | Remove the rear wheel hub | ||
| |||
5 | Disassemble the wheel hub | ||
| |||
| Check | ||
6 | Clean up and inspect the parts | Replace worn or damaged parts. | |
7 | Check the race ring friction surface for wear and, if necessary, replace it | ||
| |||
The race ring should be removed and replaced with a new one whenever it becomes damaged, worn or shows grooves on its friction surface. | |||
| Install | ||
8 | Assemble wheel hub | ||
| |||
9 | Refuel the hub with grease | .Grease | |
10 | Install the rear axle hub | ||
| |||
11 | Install the rear wheels | ||
| |||
12 | Lower vehicle from rack and tighten wheels security nuts | Retighten them after traveling the first 50 to 100 km. | |
.Nuts with integrated washer - centering in the wheel hub |
Wheel hub, hub cover |
Number | Designation | Rear axles 743.480 | |||
BF35.20-B-1001-01X | Grease | Filling volume | gramas | 32,5 | |
Class | Specification (except Brazil) | MB 267.1 | |||
Specification (Brazil) | Consultar documento AH00.40-B-0001-01MBF no site Mercedes-Benz / Guia de Lubrificantes |