ap3500w3501g

Rear axle - oil change

Typ ap · téma 35.00 · verze 0101 · 2011-12-05

Platí pro: REAR AXLE 740.8 in MODEL 958.4 REAR AXLE 740.8 in MODEL 388, 696

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 35 Zadní náprava › 35.00 Všeobecné — Řada 388 · Řada 696 · Řada 958 (modely 4**)

EinPAS 17 Hnací ústrojí/náprava › 17.51 Zadní náprava › 17.51.65 Převodovka zadní nápravy / průchozí náprava — Řada 388 · Řada 696 · Řada 958 (modely 4**)

Platí také pro motory/převodovky: 740 8**

AP35.00-W-3501G

Rear axle - oil change

30.11.11

REAR AXLE 740.8 in MODEL 958.4

REAR AXLE 740.8 in MODEL 388, 696

Rear axle - oil change

Rear axle - oil change

N35.00-0273-01

N35.00-0272-01

	Drain
1	Turn wheels until oil drain screws (4) of planetary hub reduction drive are at bottom	 Only drain the transmission oil when the transmission is warm.
2	Clean area around oil filler screws (1, 3) and oil drain screws (2, 4).
3	Remove oil filler screws (1, 3) and oil drain screws (2, 4); drain transmission oil	 Do not allow the transmission oil from the planetary hub reduction drive to run over the tires. Use drainage channels.
4	Screw in oil drain screw (2)		*BA35.10-N-1001-03B
	Filling
5	Pour in transmission oil up to bottom edge of oil filler opening in rear axle housing		*BF35.10-N-1001-01B
6	Screw in oil filler screw (1)		*BA35.10-N-1002-03B
7	Turn wheels until the drain holes in the planetary hub reduction drive are at the top.
8	Install the filling reservoir at the oil filler openings of the planetary hub reduction drive, pour in specified transmission oil filling quantity	Filling reservoir	*363589046300
			*BF35.10-N-1002-01B
9	Remove filling reservoir, check oil level.	 The oil level must be at the bottom edge of the oil filler opening of the outer planetary gear.
		 Filling reservoir	*363589046300
10	Coat thread of oil filler screw (3) with sealant.	Only planetary hub reduction drive with sheet metal cover.	*BR00.45-Z-1012-01A
11	Screw in oil filler screw (3) and oil drain screw (4)		*BA35.10-N-1001-03B
			*BA35.10-N-1002-03B
12	Carry out oil change at rear axle through-drive housing	Only with through-drive rear axles	AP35.00-W-3502G

 Rear axle

Number	Designation				Rear axle 740.8


BA35.10-N-1001-03B	Oil drain screw			Nm	120
BA35.10-N-1002-03B	Oil filler plug		M24	Nm	120
		for cast cover	M45	Nm	-
		for sheet metal cover with sealant	M45	Nm	150

 Rear axle

Number	Designation			Rear axle 740.8


BF35.10-N-1001-01B	Rear axle	Filling capacity	l	12
		Specifications for Operating Fluids	Sheet	BB00.40-P-0235-00A
			Sheet	BB00.40-P-0235-06A
			Sheet	BB00.40-P-0235-08A
			Sheet	BB00.40-P-0235-20A
BF35.10-N-1002-01B	Planetary hub reduction drive	Filling capacity per side	l	3,25
		with Trilex wheel rim	l	-
		Specifications for Operating Fluids	Sheet	BB00.40-P-0235-00A
			Sheet	BB00.40-P-0235-06A
			Sheet	BB00.40-P-0235-08A
			Sheet	BB00.40-P-0235-20A

Rear axle - oil change

363 589 04 63 00

Filling reservoir

Repair materials

Number	Designation	Order number
BR00.45-Z-1012-01A	Sealant, Omnifit FD 3041	A 002 989 47 20 10

Odkazované dokumenty

ap3500w3502g