AP35.00-I-3501K | Rear axle - oil change | 2.4.07 |
REAR AXLE 746.642 /645 /646 /647 /669 /680 /682, 748.800
I35.10-0006-01
Shown on rear axle 746.682
1 Oil filler plug
2 Oil drain screw
| Remove/install | ||
1 | Conduct a road test | This heats oil in rear axle to operating temperature. | |
2 | Clean area around oil filler plug (1) and oil drain screw (2) | ||
3 | Unscrew oil filler screw (1) | Installation: Replace sealing ring. | |
| |||
| |||
4 | Unscrew oil drain screw (2) | Collect oil with a suitable container and allow to run out completely. | |
Installation: Replace sealing ring. Fill until the lubricant reaches the lower edge of the filler orifice. | |||
| |||
| |||
| |||
5 | Install in the reverse order |
Rear axle
Number | Designation | Rear axle 746.642/645/646/647/669/680/ | |
BA35.10-N-1001-03H | Oil drain screw | Nm | 62 |
BA35.10-N-1002-03H | Oil filler plug | Nm | 62 |
Rear axle
Number | Designation | Rear axle 746.642/645/646/647/669/680/682, | ||
BF35.10-N-1001-01G | Hypoid gear oil | Filling capacity | l | 6.5 |
Sealed differential | l | - | ||
Specifications for Operating Fluids | Sheet | |||
Sheet | ||||
Sheet | ||||
Sheet | ||||
Torque wrench
001 589 67 21 00