1 | Drain plug |
2 | Filler plug |
3 | Oil filter plug |
4 | Drain plug |
B26.10-0013-01
Drain | |||
1 | Clean with a cloth the proximities of the plugs (1, 2, 3, 4) | ||
2 | Remove the drain (1, 4) and filler (2) plugs and let the oil drain | Drain the oil while it is heat. Catch and dispose the oil in an ecologically correct way. | |
3 | Install the drain plugs (1, 4) | Replace the seal rings. | |
Gearbox oil drain plugs | |||
4 | Remove the oil filter plug (3) | ||
5 | Remove the oil screen with the compression spring from the gearbox case | ||
6 | Clean the screen and check for damages | Utilize an adequate fluid and compressed air jets for cleaning. Replace the sieve, if necessary. | |
7 | Install the compression spring and next the screen in the housing | ||
8 | Screw-on the filter plug (3) | Replace radial seal ring. | |
Gearshift oil filter plug | |||
Refill | |||
9 | Fill transmission | The gearbox will have to be filled until the oil level reaches the bottom edge of the filler plug opening (2). | |
.Gear oil - Approximate level | |||
with retarderGear oil - Approximate level | |||
10 | Screw-on the filler plug (2) | Replace radial seal ring. |