Clutch actuation - replace brake fluid

AP25.20-B-2981TG

Clutch actuation - replace brake fluid

31.03.2017

Model

958.2/4 with engine 457.910/918, 906.990, 926.921/930/990/992

1

Bleeding device connection

2

Protection cover

3

Transparent drain hose

4

Bleeding valve

 Caution

Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid

Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

Brake fluid notes

AH42.50-B-0001-01A

1

Remove tank cover and suck out the old brake fluid

 Use manual pump to suck out the brake fluid.

 The tank return port should be covered with brake fluid.

 Hand pump

*210589007100

2

Install the bleeding device connecting piece (1) and activate it

 See operating instructions for the bleed device manufacturer.

3

Remove protection cover (2) and connect the transparent drain hose (3) to the bleed valve (4)

 The drain hose must connect the bleed valve to an appropriate container.

4

Open the bleed valve (4) and let the new brake fluid drain until there are no more bubbles visible in the transparent drain hose (3)

5

Close bleed valve (4), remove transparent drain hose (3) and install protection cover (2)

6

Turn off bleeding device and disconnect the connecting piece (1)

 See operating instructions for the bleed device manufacturer.

7

Correct the brake fluid level in the tank and install end cover

8

Check bleed valve (4) for leaks