Clutch - Inspect lining thickness of driven plate at wear indicator

Typ ap · téma 25.20 · verze 0100 · 2016-02-12

Platí pro: Vehicle 386.0## #B, 386.0## #D, 386.3## #B, 386.3## #D, 695.0## #B, 695.0## #D with Cumbustion engine 475.9Vehicle 660.0, 695.0 with Cumbustion engine 476.9Vehicle 693.1 with Cumbustion engine 904.9Cumbustion engine 457.9 with Vehicle 693.1, 695.0, 696.0, 696.3

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

AP25.20-B-2550A

12.02.16

Vehicle 386.0## #B, 386.0## #D, 386.3## #B, 386.3## #D, 695.0## #B, 695.0## #D with Cumbustion engine 475.9

Vehicle 660.0, 695.0 with Cumbustion engine 476.9

Vehicle 693.1 with Cumbustion engine 904.9

Cumbustion engine 457.9 with Vehicle 693.1, 695.0, 696.0, 696.3

Clutch - Inspect lining thickness of driven plate at wear indicator

B25.20-0001-01

1 Protection cap

2 Rod

a New disc

b Worn disc

	Check
		The checking of the clutch disc has to be done with the clutch pedal at rest position.
1	Lift-off the protection cap (1) and examine the position of the rod (2)	a = new disc.
		b = worn disc (wear limit).
2	When the end of the rod is flush with the end of the indicator, provide for the clutch disc replacement	 In the clutch disc replacement, reset the wear indicator to the new disc position.