Charge air pipe/charge air cooling
Torque wrench
000 589 67 21 00
T09.20-0007-01
1 Undo screw (6) and remove cover (5) and exposed seal from air suction pipe.
Only perform when the cover (5) is fitted. Check seal for signs of wear and damage A worn or damaged seal must be replaced.
T18.20-0006-11
2 Unscrew both caps (1) and pull halfway out with oil filter elements (3).
Allow both oil filter housings (4) to drain completely.
3 Remove both caps (1) with the old oil filter elements (3).
4 Unclip the old oil filter elements (3) from the caps (1).
5 Replace O-rings (2).
6 Clip new oil filter elements (3) into the caps (1) and insert into the oil filter housing (4).
7 Turn in both caps (1) and then tighten them.
8 Fit cover (5) with seal onto air suction pipe and turn in screw (6) .
Only perform if cover (5) removed.