ap1820d010004c

Replace oil filter element

Typ ap · téma 18.20 · verze 0111 · 2009-12-09

Platí pro: ENGINE 904.904 /961 in MODEL 670 ENGINE 904.908 /914 /923 /936 /955 /964 in MODEL 668, 670 ENGINE 900.917 /918 /919 in MODEL 668, 670

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 18 Mazání motoru, chlazení motorového oleje › 18.20 Olejový filtr — Řada 668 · Řada 670 · Řada 900 (modely 917, 918, 919) · Řada 904 (modely 904, 908, 914, 923, 936, 955, 961, 964)

EinPAS 15 Motor › 15.20 Soustava mazání motoru › 15.20.31 Filtr/chlazení/termostat/ventilátor/nádržka — Řada 668 · Řada 670 · Řada 900 (modely 917, 918, 919) · Řada 904 (modely 904, 908, 914, 923, 936, 955, 961, 964)

AP18.20-D-0100-04C

Replace oil filter element

Oil filter

Number

Designation

Engines
900.9, 902.9, 904.9, 906.9

BA18.20-N-1003-01B

Oil filter cover to oil filter housing

Nm

25

Replace oil filter element

Socket wrench insert WAF 94 mm (14-point)

366 589 01 07 00

Replace oil filter element

N18.20-0234-01

1 Use wrench insert to unscrew cap (1) of oil filter.

2 Allow oil to drain from filter housing.

3 Remove screw cap (1) with oil filter element (2).

Unclip oil filter element (2) by pressing at side. Ensure that no foreign bodies get into the filter housing. On no account wipe out filter housing.

4 Replace compression ring (3).

5 Insert new oil filter element (2) into screw cap (1), turn-in screw cap (1) and tighten.