1 | Oil dipstick |
2 | Filter element |
3 | Threaded cover (oil filter bowl) |
4 | Fueling nozzle |
5 | Drain plug |
B18.00-A002-06
Drain | |||
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
1 | Tilt the cabin | Cable set | |
Topical note | Notes on tilting the cab | ||
Notes on engine oil | |||
2 | Remove the lower part of the acoustic encapsulation | Only in the case of the engine oil is drained through the oil drain plug. | |
3 | Remove the oil drain plug (5) and drain the engine oil | Dispose of the oil in a proper and ecologically correct way. | |
Only drain engine oil with engine at working temperature. | |||
4 | Install the oil drain plug (5) | Replace the oil drain plug sealing ring. | |
Drain screw to oil pan | |||
5 | Remove the threaded cap of the oil filter housing (3) and replace the oil filtering element (2) | ||
Dispose of the filtering element in a proper and ecologically correct way. | |||
Oil filter cover to oil filter housing | |||
Refill | |||
6 | Check the engine oil quality adjusted in the Telligent® maintenance system | Only on vehicles with Code (JW5) Telligent maintenance system. | |
Adjust the engine oil quality, if necessary. | |||
7 | Remove the filler neck cap (4) and fill with the prescribed engine oil quantity | Engine oil | |
8 | Install the filler neck cap (4) | ||
Check | |||
Warning | Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | |
9 | Start the engine | Observe the oil pressure indication. The oil pressure should be indicated in a few seconds. Do not increase the engine rotation when the oil pressure indicator is not showing. | |
Let the engine idling during 1 to 2 minutes and then, stop the engine. | |||
10 | Check the oil level with the oil dipstick (1) and, if necessary, correct the oil level | ||
11 | Check the cover (4) and oil drain plug (5) on the oil pan for leaks | ||
12 | Install the lower part of the acoustic encapsulation | ||
Warning | Risk of injury caused by body parts being pinched or crushed as cab is tilted | Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure it with the safety strut. | |
13 | Put the cabin at the original position | ||
Topical note | Notes on tilting the cab |
Filling volume for engine lubrication |
Number | Designation | Engine 460.9 in Type 963.4 | |||
BF18.00-B-1001-01B | Engine oil | Check the correct level | Oil pan | litros | 39 |
Filter | litros | 3 | |||
Maximum capacity after repair on the engine with drained oil channels | litros | 2 | |||
Oil class | MB 228.3, MB 228.31, MB 228.5, MB 228.51 |
970 589 00 31 00
Cable set
Odkazované dokumenty
- ah1800n010101ha Upozornění k motorovému oleji
- ah6080n000301a Pokyny ke sklápění kabiny řidiče
- ap1800b1811a
- ap1820w010004o Výměna vložky olejového filtru
- as0000z000501a Nebezpečí úrazu při samovolném rozjetí vozidla při běžícím motoru. Nebezpečí poranění pohmožděním a popálením při výkonech prováděných během startování nebo při běžícím motoru
- as6080z000101a Nebezpečí úrazu v důsledku přivření a přiskřípnutí při sklápění kabiny řidiče