ap1440b1481tb

Replace AdBlue filter

Typ ap · téma 14.40 · verze 0501 · 2019-10-25

Platí pro: Engine 924.9 in model 979.0 with code MS5 (Euro V)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 14 Sběrné výfukové potrubí, motorová brzda, zařízení pro snížení obsahu škodlivin ve výfukových plynech › 14.40 Dodatečná úprava spalin, AdBlue — Řada 979 (modely 0**)

EinPAS 15 Motor › 15.40 Výfuková soustava/dodatečná úprava výfukových plynů › 15.40.51 Čerpadlo/dávkovací jednotka/tryska — Řada 979 (modely 0**)

Platí také pro motory/převodovky: 924 9**

AP14.40-B-1481TB

Replace AdBlue filter

16.10.2019

Engine

924.9 in model 979.0

with code MS5 (Euro V)

Replace AdBlue filter

B14.40-0159-09

Represented in model 979.0

1

Pump module

5

Filter element

9

Sealing edge

2

Connector body

6

Protective membrane

10

Thread

3

Pin

7

Sealing ring

11

Breather

4

Sealing ring

8

Housing filter

Remove

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

1

Remove filter bowl (8)

Put an appropriate container under the pump module so that you can collect the spilt liquid.

2

Remove the sealing ring (7)

3

Remove protective membrane (6)

4

Remove filtering element (5) and sealing ring (4)

To remove the filtering element, slightly rotate and pull downwards.

Install

5

Install the breather nipple (11)

Only in case of purchasing a new filter bowl (8) where the breather nipple (11) is separated. In this case, press the breather into the filter bowl hole until you hear a click.

6

Install the filtering element (5)

Attach the filtering element (5), with the sealing ring (4), through the pin (3) and press to the thrust;.

7

Install protective membrane (6) on the filtering element (5)

The connecting body slot (2) must be clean and free from foreign bodies. The sealing edge (9) must rest properly along the slot in the connection body (2).

8

Install sealing ring (7) on the filter bowl (8)

The filter bowl slot must be clean and free from foreign bodies.

9

Install filter bowl (8) and tighten to prescribed torque

Slightly lubricate the thread (10) of the connecting body (2) using silicon grease.

 Filter bowl on the pump module

*BA14.40-B-1001-02B

ABS sensor grease

*BR00.45-Z-1019-06A

Exhaust gas after-treatment

Number

Designation

Engine 924.9, 926.9 except Liquid Only

BA14.40-B-1001-02B

Filter bowl on the pump module

Nm

32

Repair materials

Number

Designation

Order number

BR00.45-Z-1019-06A

ABS sensor grease

A 000 989 62 51 10

Odkazované dokumenty