ap1440b1481ta

Replace AdBlue filter

Typ ap · téma 14.40 · verze 0607 · 2019-12-09

Platí pro: Model 693, 694, 695 with engine 924.9, 926.9 Model 695 with engine 457.9 Model 934.241/251, 938.14, 963.4 with engine 457.9, 460.9 Model 936.315 with engine 541.976 Model 958.0/1 with engine 926.9 Model 958.2 with engine 926.9 Model 958.4 with engine 457.9 Model 979.0 with engine 924.9 except code MS5 (Euro V)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 14 Sběrné výfukové potrubí, motorová brzda, zařízení pro snížení obsahu škodlivin ve výfukových plynech › 14.40 Dodatečná úprava spalin, AdBlue — Řada 460 (modely 9**) · Řada 693 · Řada 694 · Řada 695 · Řada 934 (modely 241, 251) · Řada 936 (modely 315) · Řada 938 (modely 14*) · Řada 958 (modely 0**, 1**, 2**, 4**) · Řada 963 (modely 4**) · Řada 979 (modely 0**)

EinPAS 15 Motor › 15.40 Výfuková soustava/dodatečná úprava výfukových plynů › 15.40.51 Čerpadlo/dávkovací jednotka/tryska — Řada 460 (modely 9**) · Řada 693 · Řada 694 · Řada 695 · Řada 934 (modely 241, 251) · Řada 936 (modely 315) · Řada 938 (modely 14*) · Řada 958 (modely 0**, 1**, 2**, 4**) · Řada 963 (modely 4**) · Řada 979 (modely 0**)

Platí také pro motory/převodovky: 457 9**, 541 976, 924 9**, 926 9**

AP14.40-B-1481TA

Replace AdBlue filter

25.11.2019

Model

693, 694, 695 with engine 924.9, 926.9

Model

695 with engine 457.9

Model

934.241/251, 938.14, 963.4 with engine 457.9, 460.9

Model

936.315 with engine 541.976

Model

958.0/1 with engine 926.9

Model

958.2 with engine 926.9

Model

958.4 with engine 457.9

Model

979.0 with engine 924.9

except code MS5 (Euro V)

Replace AdBlue filter

1

Filter Element

2

Pump filter unit

N14.40-2005-11

Remove/install

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

1

Detach the AdBlue supply and return pipes in the filter pump unit (2)

Clamp

*000589543700

2

Place a suitable container to catch the excess AdBlue fluid below the pump filter unit (2)

3

Remove filter element (1)

Model 693, 694, 695 with engine 924.9, 926.9
Model 695 with engine 457.9
Model 934.241/251, 938.14, 963.4 with engine 457.9, 460.9
Model 936.315 with engine 541.976
Model 958.0/1 with engine 926.9
Model 958.2 with engine 926.9
Model 958.4 with engine 457.9
Model 979.0 with engine 924.9
except code MS5 (Euro V)


Use as sliding agent the prescribed MB silicon grease. Silicon grease application must be extremely moderated.
Otherwise it may cause damage to the SCR system.

Installation: Apply a thin layer of MB silicone grease to the O-ring of the filter element (1) and to the filter bowl before assembly. It is not necessary to bleed the system, since this happens automatically.

ABS sensor grease

*BR00.45-Z-1019-06A

Engine 924.9; 926.9Filter bowl on the pump module

*BA14.40-B-1001-02B

Engine 457.9, 460.9Filter bowl on the pump module

*BA14.40-B-1001-02C

4

Install in reverse order

Exhaust gas after-treatment

Number

Designation

Engine 924.9, 926.9 except Liquid Only

BA14.40-B-1001-02B

Filter bowl on the pump module

Nm

32

Exhaust gas after-treatment

Number

Designation

Engine 460.9 in type 963.4

Engine 457.9; 460.984 except Liquid Only

BA14.40-B-1001-02C

Filter bowl on the pump module

Nm

32

32

Replace AdBlue filter

000 589 54 37 00

Clamp

Repair materials

Number

Designation

Order number

BR00.45-Z-1019-06A

ABS sensor grease

A 000 989 62 51 10

Odkazované dokumenty