ap1322i1351b

Check poly-V belt for wear and damage

Typ ap · téma 13.22 · verze 0104 · 2007-04-03

Platí pro: ENGINE 904.941 in MODEL 684.482

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 13 Vzduchový kompresor, řemenový převod › 13.22 Jednořemenový převod — Řada 684 (modely 482) · Řada 904 (modely 941)

EinPAS 15 Motor › 15.18 Řemenový pohon › 15.18.30 Řemen/řemenice/napínací ústrojí/vratná kladka — Řada 684 (modely 482) · Řada 904 (modely 941)

AP13.22-I-1351B

Check poly-V belt for wear and damage

22.3.07

ENGINE 904.941 in MODEL 684.482

Check poly-V belt for wear and damage

N13.22-0280-06

1 Poly-V-belt

2 Cranking device

S10 Starter switch

S11 Stop switch

Check

Danger!

Risk of accident caused by vehicle starting off by itself when engine is running. Risk of injury caused by contusions and burns during starting procedure or when working near the engine as it is running

Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

1

Install cranking device (2) at timing case

Only carry out if the engine is to be turned with the aid of the turning device (2).

Attach/detach cranking/blocking device for engine

AR03.30-W-1600-03A

*BA01.60-N-1002-01A

*BA01.60-N-1003-01A

*904589046300

2.1

Crank the engine in stages with the aid of the starter switch (S10) and the
stop switch (S11) and in the process check the entire periphery of the poly-V belt (1) in sections for wear and damage

The engine does not start when the starter switch (S10) and
stop switch (S11) are pressed simultaneously.

Damage profiles for poly-V belt

AP13.22-D-1351-01A

The poly-V belt (1) should be replaced subject to a separate repair order in the event of wear or damage:

Remove/install poly-V belt

AR13.22-I-1202B

2.2

Crank the engine in stages with the aid of the turning device (2) and in the process check the entire periphery of the poly-V belt (1) in sections for wear and damage

Damage profiles for poly-V belt

AP13.22-D-1351-01A

The poly-V belt (1) should be replaced subject to a separate repair order in the event of wear or damage:

Remove/install poly-V belt

AR13.22-I-1202B

3

Detach turning device (2) from timing case

Only carry out if the turning device (2) has been installed.

Attach/detach cranking/blocking device for engine

AR03.30-W-1600-03A

*BA01.60-N-1002-01A

*BA01.60-N-1003-01A

*904589046300

Timing case

Number

Designation

Engines
900.9, 902.9, 904.9, 906.9

BA01.60-N-1002-01A

Inspection hole closure cover to timing case

Nm

25

BA01.60-N-1003-01A

Bolt, turning device to timing case

Nm

25

Check poly-V belt for wear and damage

904 589 04 63 00

Cranking device

Odkazované dokumenty