Replace air filter element

Typ ap · téma 09.10 · verze 0102 · 2008-08-21

Platí pro: ENGINE 902.9, 906.9, 926.9 in MODEL 957.5## #V as of 213116 except CODE (MS8) Natural gas engine ENGINE 902.9, 906.9, 926.9 in MODEL 957.6## #V as of 213116 except CODE (MS8) Natural gas engine ENGINE 926.9 in MODEL 957.38# #V as of 213116 ENGINE 902.9, 906.9 in MODEL 957.5## #V as of 215748 with CODE (MS8) Natural gas engine ENGINE 902.9, 906.9 in MODEL 957.6## #V as of 215748 with CODE (MS8) Natural gas engine

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 09 Sání vzduchu, plnění › 09.10 Vzduchový filtr — Řada 902 (modely 9**) · Řada 906 (modely 9**) · Řada 957 (modely 38*, 5**, 6**)

EinPAS 15 Motor › 15.30 Sání vzduchu/přeplňování › 15.30.40 Vzduchový filtr/skříň vzduchového filtru — Řada 902 (modely 9**) · Řada 906 (modely 9**) · Řada 957 (modely 38*, 5**, 6**)

Platí také pro motory/převodovky: 926 9**

AP09.10-W-0980H

Replace air filter element

23.4.07

ENGINE 902.9, 906.9, 926.9 in MODEL 957.5## #V as of 213116 except CODE (MS8) Natural gas engine

ENGINE 902.9, 906.9, 926.9 in MODEL 957.6## #V as of 213116 except CODE (MS8) Natural gas engine

ENGINE 926.9 in MODEL 957.38# #V as of 213116

ENGINE 902.9, 906.9 in MODEL 957.5## #V as of 215748 with CODE (MS8) Natural gas engine

ENGINE 902.9, 906.9 in MODEL 957.6## #V as of 215748 with CODE (MS8) Natural gas engine

N09.10-2072-01

1 Filter insert

2 Seal boot

N09.10-2073-01

	Removing
1	Open locking clips (arrows) and remove air filter cover	 Clean air filter cover, to the extent necessary.
2	Press filter element (1) to the right and remove	 Replace filter element (1). Clean inside of filter housing, to the extent necessary.
	Install
3	Insert new filter element (1) into the air filter housing and press to the left	 Pay attention to faultless seat of the seal boot (2).
4	Insert air filter cover and close locking clips (arrows)	Make sure that the locking clips (arrows) are adequately tensioned (arrows).
5	Confirm replacement of the filter element (2) in the maintenance booklet