AP09.10-T-0980A | Replace air filter element | 10.3.06 |
ENGINE 402, 441, 446, 457 in MODEL NMB613
ENGINE 447, 489 in MODEL NMB671
T09.10-0007-01
Illustrated on model 613
4 Air filter element
5 Air filter housing
6 Dust separator
T09.10-0004-02
Illustrated on model 671
1 Dust receptacle
3 Seal
4 Air filter element
5 Air filter housing
T09.10-0006-01
Illustrated on model 671
7 Maintenance indicator release
8 Inspection window
| Removing | ||
1 | Remove dust receptacle (1) | in case of model 671 | |
in case of model 613 | |||
2 | Remove air filter element (4) | ||
| Clean | ||
3 | Clean interior and sealing surfaces of air filter housing (5) | ||
4 | Remove and clean dust separator (6) | Only for model 613 | |
| Install | ||
5 | Fit dust receptacle (1) | in case of model 671 | |
in case of model 613 | |||
6 | Install air filter element (4) | Mark the installation date of the new air filter element (4) using a water-resistant marker on the front or on a label. Ensure that the seal (3) is correctly seated and not damaged. | |
7 | Actuate release maintenance indicator (7) | Only necessary, if the red field in the inspection glass (8) on the maintenance indicator has latched into place. | |
8 | Confirm replacement of the air filter element (4) in the maintenance booklet |