ap0100t0151ca

Check engine attached parts for leaktightness and condition

Typ ap · téma 01.00 · verze 0101 · 2005-07-12

Platí pro: ENGINE 457.944 in MODELNMB613.367 ENGINE 457.941 in MODELNMB613.368

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 1 Motor › 01 Motor kompletní, odvětrání motoru, hlava válců, kliková skříň › 01.00 Všeobecné — Řada 613 (modely 367, 368)

EinPAS 15 Motor › 15.15 Kompletní spalovací motor/blok motoru/klikový mechanismus › 15.15.15 Spalovací motor kompletní — Řada 613 (modely 367, 368)

Platí také pro motory/převodovky: 457 941, 457 944

AP01.00-T-0151CA

Check engine attached parts for leaktightness and condition

8.5.02

ENGINE 457.944 in MODELNMB613.367

ENGINE 457.941 in MODELNMB613.368

Testing

Danger!

Risk of accident as vehicle may start off by itself with the engine running. Risk of injury as working around the engine during start-up or while running may result in contusions and burns

Secure vehicle to prevent it from moving.
Wear closed and snug-fitting work clothes.
Do not grasp hot or rotating parts.

AS00.00-Z-0005-01A

1

Remove floor panel in center aisle and above engine

2

Detach lower engine compartment paneling

Remove/install bottom engine compartment paneling

AR61.20-T-1105CA

3

Start engine and allow to idle

4

Check engine and attached major assemblies for external leaks through visual inspection

Slightly wet areas are safe. Severe leaks with continuous oil leakage should be repaired immediately
(against separate order).

5

Install lower engine compartment paneling.

Remove/install bottom engine compartment paneling

AR61.20-T-1105CA

6

Install floor panels in center aisle and above engine

7

Switch off engine

Odkazované dokumenty