ap0070p1000sm

Safety precautions for new vehicles that are being put in storage

Typ ap · téma 00.70 · verze 0102 · 2007-07-06

Platí pro: MODEL 450.3 /4, 452.3 /4, 454.0

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 0 Celkový › 00 Celkové vozidlo › 00.70 Odstavení vozidla, opětovné zprovoznění vozidla — Řada 450 (modely 3**, 4**) · Řada 452 (modely 3**, 4**) · Řada 454 (modely 0**)

EinPAS 45 Data/informace › 45.10 Celkové vozidlo › 45.10.20 Celkové vozidlo — Řada 450 (modely 3**, 4**) · Řada 452 (modely 3**, 4**) · Řada 454 (modely 0**)

AP00.70-P-1000SM

Safety precautions for new vehicles that are being put in storage

27.6.07

MODEL 450.3 /4, 452.3 /4, 454.0

New vehicles in the context of this description are vehicles for which no inspection has been carried out to date. For other vehicles, the instructions in the Specifications for Operating Fluids apply

In areas in which extremely high corrosive attacks can be expected from experience, the measures given here are not always sufficient even for new vehicles

Export countries: In these case proceed as per the Specifications for Operating Fluids.

Print out, fill in and store this document in an archive

The test points listed below should be carried out when a vehicle is put into storage

If the vehicle is put into storage over a longer period, additional measures should be carried out regularly:

Every 90 days, see:

Perform check of vehicles in stock every 90 days

Model 450 except 450.418

AR00.20-P-0001SM

Model 450.418

AR00.20-P-0001CR

Model 452

AR00.20-P-0001RR

Model 454

AR00.20-P-0001FF

Every 270 days, see:

Perform check of vehicles in stock every 270 days

Model 450 except 450.418

AR00.20-P-0002SM

Model 450.418

AR00.20-P-0002CR

Model 452

AR00.20-P-0002RR

Model 454

AR00.20-P-0002FF

The defects/complaints found in the process should be eliminated when the vehicle is put into storage or at a predelivery inspection.

Put vehicle into storage

completed

In order to protect the fuel tank from condensate, we recommend filling the tank completely

Brake the vehicle until the service brakes are hot so that adhering moisture on the brake disks and brake pads evaporates

This prevents the brake pad from becoming stuck to the brake disks.

Secure the vehicle by engaging a gear or by a wedge, parking brake in release position

Move all the seats into the normal position (set seat backrest to upright position)

Open the door on the passenger-side and lock the vehicle with the transmitter key

Model 450

Open hood, close the vehicle doors and lock with the transmitter key

Model 452

Open engine hood, close the vehicle doors and lock with the transmitter key

Model 454

Disconnect battery ground line

This in turn prevents any discharging of the battery through quiescent current consumers (time switch etc.).

STAR DIAGNOSIS need not be connected.

Disconnect/connect battery ground line

Model 450

AR54.10-P-0003SM

Model 452

AR54.10-P-0003RR

Model 454

AR54.10-P-0003FF

Close door on passenger-side

Model 450

Close front hood

Model 452

Close engine hood

Model 454

Putting the vehicle into storage carried out by:

Chassis number:

Parked at:

Company:

Name:

Date:

Signature:

Remarks/defects found:

Put the vehicle into storage

completed

Unlock vehicle via the lock cylinder on the rear-end door

Open vehicle door on passenger-side

Model 450

Open front hood

Model 452

Open engine hood

Model 454

Connect ground cable to battery

STAR DIAGNOSIS need not be connected.

Disconnect/connect battery ground line

Model 450

AR54.10-P-0003SM

Model 452

AR54.10-P-0003RR

Model 454

AR54.10-P-0003FF

Eliminate defects found during stock care

Putting the vehicle into storage carried out by:

Chassis number:

Parked at:

Company:

Name:

Date:

Signature:

Remarks/defects found:

Odkazované dokumenty