ap0020t007303ba

Retighten spring bracket on air bellows support of rear axle

Typ ap · téma 00.20 · verze 0100 · 2006-07-25

Platí pro: MODEL NMB613.358 /388 with REAR AXLE 746.217

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 0 Celkový › 00 Celkové vozidlo › 00.20 Údržba, systémy údržby (FSS, ASSYST) — Řada 613 (modely 358, 388)

EinPAS 17 Hnací ústrojí/náprava › 17.51 Zadní náprava › 17.51.50 Skříň/nosná trubka/můstek/nosník/roura hnacího hřídele — Řada 613 (modely 358, 388)

Platí také pro motory/převodovky: 746 217

AP00.20-T-0073-03BA

Retighten spring bracket on air bellows support of rear axle

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between the columns of the lifting platform and position the four support plates at the lifting platform support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

Air bellows support

Number

Designation

Rear axle 746.217 in model
613.358/388

BA32.22-N-1003-03D

Air bellows support to rear axle

Stage 1

Nm

50

Stage 2

Nm

200

Stage 3

Nm

300

Stage 4

Nm

400

Stage 5

Nm

500

Stage 6

Nm

600

Stage 7

Nm

700

Stage 8

Nm

850

after 1500 up to 5000 km

Re-tightening

Nm

850

Retighten spring bracket on air bellows support of rear axle

Ratio wrench

000 589 69 63 00

Workshop equipment

WE58.40-Z-1005-05A

Wheel gripper

Retighten spring bracket on air bellows support of rear axle

T35.10-0054-06

1 Raise vehicle.

Place suitable jack stands underneath the lift support points provided.

2 Retighten the nuts (1, 2, 3, 4) on the spring brackets (5) in the order of the numbering .

3 Remove the jack stands and lower the vehicle.

Odkazované dokumenty