All lines and hoses, sensor cables - checking tightness and condition · ap0020m0051b · Mercedes-Benz WIS

AP00.20-M-0051B

All lines and hoses, sensor cables - checking tightness and condition

1.7.04

MODEL 903.662
Sprinter Eco minibus

MODEL 903.662
Sprinter Group minibus

MODEL 903.662
Sprinter Mobility minibus

MODEL 903.663
Sprinter Eco minibus

MODEL 903.663
Sprinter Group minibus

MODEL 903.663
Sprinter Mobility minibus

MODEL 904.663
Sprinter Eco minibus

MODEL 904.663
Sprinter Group minibus

MODEL 904.663
Sprinter Classic minibus

MODEL 904.663
Sprinter Tourist minibus

MODEL 904.663
Sprinter Low-Floor minibus

MODEL 905.613
Sprinter Classic 6 t minibus

MODEL 905.613
Sprinter Low-Floor 6 t minibus

MODEL 905.613
Sprinter Classic 2+2 - 6.34 t minibus

	Check
1	Visually inspect all lines and hoses of brake system and clutch operating system as well as all lines and hoses for oil, fuel, coolant, compressed air and vacuum lines.	Check the lines and hoses for leaks and damage (e.g. corrosion, porosity, chafing marks, kinks, etc.). If damage or defects are found:  Seal or replace lines and hoses - subject to a separate order.
2	Check that all electrical lines in the engine compartment and on the underbody as well as the connection lines for the ABS sensors and brake lining wear indicators are routed and secured correctly and do not chafe against other components	If damage or defects are found:  Route and secure lines correctly; install new lines if necessary - subject to separate repair order.
3	Check pressure loss in the compressed air system; release the parking brake before commencing this	Model 904.663, 905.613 Secure vehicle to prevent it moving away.