B00.20-0184-07
1 | Steering gear | 8 | Brake system cylinders | 15 | Upper part of the air cleaner assembly | ||
2 | Upper part of front suspension | 9 | Fuel tank floats | 16 | Engine | ||
3 | APU valve | 10 | Rear pins of the articulation | 17 | Intermediate suspension shock absorbers | ||
4 | Bolts of front suspension tension rod | 11 | Swivel joint of the articulation | 18 | Rear suspension shock absorbers | ||
5 | Air reservoirs of the front car | 12 | Air reservoirs of the rear car | 19 | Intermediate suspension tension rod | ||
6 | Bolts of the bellows of the intermediate axle | 13 | Upper part of the rear axle | 20 | Valves of the intermediate axle suspension and the brake system | ||
7 | Intermediate suspension shock absorbers | 14 | Gearbox (including oil level check dipstick, sensors and mountings) |
B00.20-0185-07
21 | Fuel tanks | 24 | Intake air box for the engine and the air cleaner element | |
22 | Fuel tank filler neck | 25 | Radiators compartment | |
23 | Batteries compartment |
16 | Bolts of front suspension tension rod |
26 | Front part of the pedals mounting bracket |
B00.20-0182-01
27 | Engine compartment (rear access) |
28 | Compartment of the engine and steering fluid reservoir (side access) |
B00.20-0180-01
Check | |||
1 | Check the levels of filling of fluids | The body must enable the free access for checks. | |
2 | Check the free access to perform the maintenance works on the chassis | The main points to be checked for the availability of access for maintenance works and fillings are represented according to the figure, on the chassis of O500 UA | |
For other chassis types, The checks should be carried out based on information presented on the specific body mounting manual of each vehicle type. |