Connect toll system wiring harness to tachograph (MTCO)

Typ an · téma 82.88 · verze 0100 · 2003-06-06

Platí pro: MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## up to 472725 with CODE (F04) Cab L (long) except CODE (DD1) Cab with 1400 mm standing height (car transporter) except CODE (DD2) Cab with 1550 mm standing height Mautsystem Fa. Grundig in Fahrzeuge mit Tachograph FTCO MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## up to 472725 with CODE (F15) MEGASPACE cab Mautsystem Fa. Grundig in Fahrzeuge mit Tachograph FTCO

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

AN82.88-W-0001-06B

W82.88-1030-02

1 Disconnect green/black line (1), between contact cavity 8/8 in the plug X2 of the tachograph (P1) and contact cavity 18/15 in the plug X1 of the WS/FSS control unit (A30), behind the tachograph (P1).

2 Attach plug contact to the separated green/black line (1) (tachograph side).

3 Attach plug contact to the separated green/black line (1) (WSS/FSS control unit side), together with the green/red line (2) from the plug X/B, contact cavity 3 of the toll system wiring harness.

4 Connect lines (1 and 2) as a Y-connector (3) as shown in the picture.

 The tamper tell-tale (4) must not be removed in the process (paragraph 57b).