Install extension line for multi-function antenna

Typ an · téma 82.88 · verze 0101 · 2003-08-15

Platí pro: MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## up to 472725 with CODE (F04) Cab L (long) except CODE (DD1) Cab with 1400 mm floor-to-ceiling height (car transporter) except CODE (DD2) Cab with 1550 mm floor-to-ceiling height Mautsystem Fa. Grundig in Fahrzeuge mit Tachograph FTCO MODEL 950.0## /1## /2## /3##, 952.0## /1## /2## /3##, 953.1## /3##, 954.0## /1## /2## ## up to 472725 with CODE (F15) MEGASPACE cab Mautsystem Fa. Grundig in Fahrzeuge mit Tachograph F

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

AN82.88-W-0001-02B

W82.88-1037-12

1 Mark drill hole (5) on the stowage compartment (6) above the windshield.

a = 300 mm

b = 170 mm

2 Drill hole (5) at least Ø 22 mm.

W82.88-1031-01

3 Make cutout (1) in the headliner behind the CB radio installation location (7), in the stowage compartment (6) above the windshield.

4 In order to pull in the extension lines from the opening in the interior lamp, push a suitable aid (e.g. air line Ø 6 mm or wire) to the cutout (1).

5 Secure extension lines to the aid and pull through the opening in the interior lamp to the cutout (1).

W82.88-1010-01

6 Push foam sleeves (4) over the connection lines of the multi-function antenna.

7 Connect extension lines (2) to the connectors on the connection lines of the multi-function antenna.

8 Push foam sleeves (4) over the connectors.

9 Secure connectors to the interior lamp feed line using tie straps.

W82.88-1036-12

10 Route extension lines inside the stowage compartment (6) above the windshield and through the opening (5) to the installation location of the on-board unit (toll collection unit).

 The antenna extension lines must not be shortened. The excess length of the lines must be accommodated inside the stowage compartment (6) above the windshield.