P82.61-0353-06
Drilling template
P82.61-0352-01
1 Mask a large area of trunk lid with adhesive tape or sheeting. Mark center of trunk lid.
2 Copy template to scale and stick onto trunk lid as illustrated.
3 Drill holes as illustrated.
When working out the drilled holes, do not damage the paint and the trunk lid. Drilling swarf must not be removed with a magnet. Coat bright metallic body points at the drilled holes with zinc dust paint.
P82.61-0354-01
4 Fit grommet (28) onto antenna cable of rear global positioning system (GPS) antenna (A2/23a2) and insert into hole in trunk lid. Position rear global positioning system (GPS) antenna as illustrated.
P82.61-0355-01
5 Run antenna cable (29) of auto pilot system wiring harness (1) through the left trunk lid arm as illustrated.
6 Connect antenna cable (29) to rear global positioning system (GPS) antenna (A2/23a2) and affix to felt base on inside of trunk lid (arrow).
P82.61-0356-01
7 Attach cap (30) to rear global positioning system (GPS) antenna (A2/23a2) with screw (31).