Adjustment value
Number | Designation | Model 171.4 | ||
BE65.00-P-1001-01A | Adjustment value for jigging blind rivet nut for roof rack mounting | mm | 3.5 (+0.1) | |
Workshop equipment
WE58.40-Z-1003-14A | Blind rivet tool |
P77.50-2182-01
1 Remove rubber cover (12) next to trunk lid seal (11)
Rubber cover (12) is no longer required
P77.50-2183-01
2 Bend sheet metal channel (14) down to a length of a = 50 mm to ensure free access to blind rivet nut mount (13)
Avoid damaging paint
a = 50 mm
P77.50-2184-01
3 Adjust jigging on jigging tool for blind rivet nuts (15) to 3.5+0.1 mm.
See operating instructions of jigging tool for blind rivet nuts (15).
Protect Vario roof against damage with cover (16)
4 Position blind rivet nut on jigging tool for blind rivet nuts (15) and pull in (e.g. with FireBird blind rivet tool, electro-mechanical jigging tool for blind rivet nuts).
P77.50-2185-01
The blind rivet nut (2) should be positioned absolutely flat, if necessary repull with jigging tool for blind rivet nuts (15)
P77.50-2186-01
5 After installing blind rivet nut (2) bend back sheet metal channel (14) and seal bending area with body sealant
Seal bending area on inner and outer side