an6810d4685a

Retrofit DIN-slot (2-slots)

Typ an · téma 68.10 · verze 0102 · 2014-03-03

Platí pro: MODEL 906 with CODE EF9 (Radio Sound 20) MODEL 906 with CODE EN0 (Sound 5 radio) MODEL 906 with CODE EN4 (COMAND with TMC interface) MODEL 906 with CODE EN8 (Radio sound 50 APS) MODEL 906 with CODE ER0 (Radio preinstallation with antenna and 2 speakers)

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 3 Nástavba › 68 Vnitřní výbava › 68.10 Přístrojová deska — Řada 906

EinPAS 37 Vnitřní výbava › 37.15 Přístrojová deska › 37.15.3 Dodatečná montáž/přemontování — Řada 906

AN68.10-D-4685A

Retrofit DIN-slot (2-slots)

17.02.2014

MODEL

906

with CODE EF9 (Radio Sound 20)

MODEL

906

with CODE EN0 (Sound 5 radio)

MODEL

906

with CODE EN4 (COMAND with TMC interface)

MODEL

906

with CODE EN8 (Radio sound 50 APS)

MODEL

906

with CODE ER0 (Radio preinstallation with antenna and 2 speakers)

Retrofit DIN-slot (2-slots)

Shown with CODE EN0 (Radio Sound 5)

3

Cover

4

Stowage compartment (with CODE EN0 (Radio Sound 5)

6

Stowage box/tray

7

Cover

S98

AC control and operating unit

D68.10-1156-02

Information on preventing damage to electronic components due to electrostatic discharge

AH54.00-P-0001-01A

Notes on carrying out repair work in the vehicle interior

AH68.00-N-0001-01S

Remove

1

Remove cover (3)

For this purpose carefully unclip cover (3) using long wedge starting at top. Disconnect electrical connector from covering (3) and remove covering (3).

Long wedge

*115589035900

2

Remove covers (7) on air vent from instrument panel center section

AR68.10-D-1585A

3

Unclip stowage compartment (4)

MODEL 906
with CODE EN0 (Sound 5 radio)

The stowage compartment (4) is a dispensable part.

4

Remove radio/radio with navigation

MODEL 906
with CODE EF9 (Radio Sound 20)
MODEL 906
with CODE EN0 (Sound 5 radio)
MODEL 906
with CODE EN4 (COMAND with TMC interface)
MODEL 906
with CODE EN8 (Radio sound 50 APS)

MODEL 906 with CODE EF9 (Radio Sound 20) with CODE EN0 (Radio Sound 5) with CODE EN4 (Comand with TMC interface) with CODE EN8 (Radio Sound 50 APS)

AR82.60-D-7502B

5

Remove air conditioning control and operating unit (S98)

MODEL 906
with CODE EF9 (Radio Sound 20)
with CODE EN0 (Sound 5 radio)
with CODE EN4 (COMAND with TMC interface)
with CODE EN8 (Radio sound 50 APS)
with CODE ER0 (Radio preinstallation with antenna and 2 speakers)
without CODE HH7 (Additional air conditioning in rear)
without CODE HH9 (Regulated air conditioning (Tempmatic))

AR83.25-D-1124D

MODEL 906.6/7
with CODE EF9 (Radio Sound 20)
with CODE EN0 (Sound 5 radio)
with CODE EN4 (COMAND with TMC interface)
with CODE EN8 (Radio sound 50 APS)
with CODE ER0 (Radio preinstallation with antenna and 2 speakers)
with CODE H08 (High-performance air conditioning)
with CODE HH7 (Additional air conditioning in rear)
with CODE HH9 (Regulated air conditioning (Tempmatic))

AR83.25-D-1124C

6

Remove radio installation frame

The radio installation frame is fastened with six bolts. Slightly lift long wedge to remove stowage compartment (6). If applicable, loosen bolts on stowage box/tray (6).

The present radio installation frame is eliminated.

Long wedge

*115589035900

Install

7

Retrofit installation frame for DIN slot (2-slot)

The installation frame for the DIN slot (2-slot) is fastened with four bolts.

8

Install air conditioning system control and operating unit (S98)

9

Install covers (7) on air vent on instrument panel center section

AR68.10-D-1585A

10

Connect electrical connector to covering (3)

11

Clip in cover (3)

Retrofit DIN-slot (2-slots)

115 589 03 59 00

Long wedge

Parts ordering note

Part no.

Designation

Quantity

A 906 689 0531

Radio mounting console

1

Odkazované dokumenty