an5421w0002e

Retrofit parameterizable special module (PSM)

Typ an · téma 54.21 · verze 0105 · 2012-02-15

Platí pro: MODEL 950.5 /6, 952.5 /6, 953.6, 954.5 Retrofit code EM7 or EM8

Není k dispozici v jazyce „cs“; zobrazeno v jazyce Angličtina.

Zařazení

Funkční skupina 2 Podvozek › 54 Elektrické zařízení, výstroj a přístroje › 54.21 Řídicí jednotky / moduly — Řada 950 (modely 5**, 6**) · Řada 952 (modely 5**, 6**) · Řada 953 (modely 6**) · Řada 954 (modely 5**)

EinPAS 25 Palubní síť/síť/multifunkční systém › 25.15 Síť/multifunkční systém › 25.15.3 Dodatečná montáž/přemontování — Řada 950 (modely 5**, 6**) · Řada 952 (modely 5**, 6**) · Řada 953 (modely 6**) · Řada 954 (modely 5**)

AN54.21-W-0002E

Retrofit parameterizable special module (PSM)

14.2.12

MODEL 950.5 /6, 952.5 /6, 953.6, 954.5
Retrofit code EM7 or EM8

Retrofit parameterizable special module (PSM)

W54.21-1057-09

1 Cab-chassis connector plate cover

2 Air scoop

A7 Base module

A22 PSM control unit

X3 PSM control unit connector

X4 PSM control unit connector

X6 Connector for base module terminal 31

X9 Connector for base module terminal 15

X11 Connector for base module terminal 30

Z1 Vehicle CAN bus star point

Removing

General information on retrofitting

AH54.21-N-0002-01A

1

Connect STAR DIAGNOSIS to diagnostic socket, switch on ignition

*WH58.30-Z-1049-13A

Print out check-in report.

AD00.00-W-2000-04A

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

2

Disconnect ground lead from battery

3

Remove air scoop (2).

4

Remove cab - chassis connector plate cover (1).

5

Remove footwell cover on right.

AR68.30-W-1300B

6

Fold out implement carrier with base module (A7).

Install

7

Retrofit PSM wiring harness.

AN54.21-W-0002-01E

Wiring diagram for base module

PE54.21-W-2400CA

PSM wiring diagram

PE54.21-W-2500Q

PSM control unit connector assignment

GF54.21-W-0002-04B

Parameterizable special module (PSM), technical data

GF54.21-W-0002-02B

*210589023300

8

Install in the reverse sequence.

Operation steps 6 to 2

9

Parameterize PSM control unit in instrument (INS).

AR54.21-W-0002C

10

Parameterize PSM control unit in FR/FMR control unit.

AR54.21-W-0003D

11

Parameterize PSM control unit.

AR54.21-W-2001C

12

Document retrofitting of PSM control unit and auxiliary assemblies in FDOK.

Retrofit parameterizable special module (PSM)

Unlocking tool for SPT / JPT contacts

210 589 02 33 00

Commercially available tools

Number

Designation

WH58.30-Z-1049-13A

STAR DIAGNOSIS Compact diagnostic system for commercial vehicles

651 131 10 00

Parts ordering notes

Part no.

Designation

Quantity

A000 446 04 46

PSM control unit

1

A949 540 88 32

Wiring harness for LHD vehicles

1

A949 540 0032

Wiring harness RHD vehicles

1

A013 545 63 26

15-pin connection plug for PSM control unit (for body)

1

A013 545 64 26

18-pin connection plug for PSM control unit (for body)

3

Odkazované dokumenty